****PLEASE NOTE THESE ARE FOR THE NON TPD VERSION ****

Innokin t18 Coils

1.5ohm Horizontal 

The Prism T18 coils are compliant with UK and EU regulations and will be available beyond the May 2017 compliance deadline. Not compatible with the Endura T18e / Prism T18e

Guide to using Innokin Prism T18 coils

The first time - when you first use each coil wait for 5 minutes after filling to allow the e liquid to absorb fully into the coil (called ‘priming the coil’) to prevent damage and unpleasant ‘dry hits’

To change the coil - Ensure there is no e liquid in the tank. Then disconnect the tank from the battery and hold it with the screw thread facing up before unscrewing the metal cap. Gently pull on the coil to remove it. Push in the new coil after aligning the flat sides before replacing the metal cap. Remember to prime the coil each time